Kit de développement pour 8 films 24x36 / 36 poses. Le développement du R-100 est très analogue à celui des autres produits inversibles

Présentation:

Le kit de développement inversible est un kit spécial destiné au développement du film inversible noir et blanc Fomapan R100. Le kit contient quatre composants dont un révélateur à hydroquinone pour les 1er et 2e développements, un fixateur à thiosulfate d'ammonium, un bain de blanchiment et un bain de lavage. Le kit de développement permet de préparer 8 bains de développement de 330ml

Développement procédé R-100 :

Note :

* Le temps de développement dépend des diverses procédures de développement utilisées.
         

** les informations entre parenthèses sont applicables en cas d’application du bain inversible.

Processing set for FOMAPAN R100
Efficiency of the set
– for processing of 8 pcs 135/36 FOMAPAN R 100 cine-films
(or 2 pcs 2x8 mm/10.5 m; 1 pc 16 mm/30 m).
– for preparation of 8x330 ml of processing baths.
Content of the set:
1st and 2nd developer Identification A = 1 pc of concentrate in PE bottle 250 ml
Bleaching bath Identification B1 = 1 pc of concentrate in PE bottle 250 ml
+B2 = 1 pc of concentrate in PE bottle 250 ml Prepare processing bath immediately before using.
Cleaning bath Identification C = 1 pc of concentrate in PE bottle 250 ml
Fixing bath Identification D = 1 pc of concentrate in PE bottle 500 ml
Preparation of baths to process 1 pc of 135/36 cine-film:
A 300 ml of water + 30 ml of A solution
B 300 ml of water + 30 ml of B1 solution + 30 ml of B2 solution
C 300 ml of water + 30 ml of C solution
D 300 ml of water + 60 ml of D solution
It is recommended to use distilled or boiled water to prepare baths. Prepare processing bath immediately before using. Do not store solved (thinned) solutions! Have an authorised organisation to dispose of used solutions.
Procedure of processing:
1)
Developer A
12 min / 20 oC ±0.5 oC
1a)
Rinsing with running water
2 min / 20 oC ± 5 oC
2)
Bleaching bath B
8 min / 20 oC ± 0.5 oC
2a)
Rinsing with running water
2 min / 20 oC ± 5 oC
3)
Cleaning bath C
3 min / 20 oC ± 3 oC
3a)
Rinsing with running water
2 min / 20 oC ± 5 oC
4)
Re-exposure
2x30 sec.
5)
Developer A (solution used in the 1st developing)
5 min / 20 oC ±0.5 oC
5a)
Rinsing with running water
2 min / 20 oC ± 5 oC
6)
Fixing bath D
4 min / 20 oC ± 3 oC
6a)
Rinsing with running water
10 min / 20 oC ± 5 oC
6b)
Rinsing in distilled water
Processing in developing tank with regular slow motion during all processing stages, including rinsing!
Illumination during processing (stages 1 to 2a) - total dark or infrared lighting.
Re-exposure to be done in the developing tank using a 100 W bulb in a distance of 1 m in water and with the film moving (turning the spiral with the film) - 30 sec. from both sides.
End users may drain used working solutions to sewage system after thorough thinning (at least 30 more parts of water).
For